Affinity Chromatography of Mushroom Tyrosinase

Abstract

The purification by column chromatography of a phenol-oxidizing enzyme, mushroom tyrosinase, was investigated using solid phase adsorbents designed to have specific affinity for the enzyme. Sepharose 4B, aminophenyl-bearing porous glass, and p-aminobenzylcellulose were chemically modified to introduce phenolic, catecholic, or benzoic groups on the polymer surface. The resulting preparations were tested for their effectiveness in separating tyrosinase from an impure protein mixture. The phenolic and benzoic polymers displayed no specific affinity for tyrosinase. Aminophenyl glass, with or without an attached phenolic group, adsorbed appreciable quantities of protein nonspecif-ically, thus complicating studies of its tyrosinase affinity properties. Dopamine, a dihydroxyphenyl derivative, was bound to Sepharose and was found to be effective in retaining tyrosinase at pH 5.5; elution of the enzyme by washing at pH 8.8 resulted in its purification by a factor of 10 to 14. Enzymatic oxidation of the adsorbent limited the number of purification cycles which could be carried out on a single column.     

Hydrogenation and hydrogenolysis of furfural and furfuryl alcohol catalyzed by ruthenium(II) bis(diimine) complexes

The catalytic activity of ruthenium(II) bis(diimine) complexes cis‐[Ru(6,6′‐Cl₂bpy)₂(OH₂)₂](Z)₂ ( 1 , Z = CF₃SO₃; 2 , Z = (3,5‐(CF₃)₂C₆H₃)₄B, i.e. BArF) and cis‐[Ru(4,4′‐Cl₂bpy)₂(OH₂)₂](Z)₂ ( 3 , Z = CF₃SO₃; 4 , Z = BArF) for the hydrogenation and/or the hydrogenolysis of furfural (FFR) and furfuryl alcohol (FFA) was investigated. The molecular structures of cis‐[Ru(4,4′‐Cl₂bpy)₂(CH₃CN)₂](CF₃SO₃)₂ ( 3 ′) and dimeric cis‐[(Ru(4,4′‐Cl₂bpy)₂Cl)₂](BArF)₂ ( 5 ) were characterized by X‐ray crystallography. The structures are consistent with the anticipated reduction in steric hindrance about the ruthenium centers in comparison with corresponding complexes containing 6,6′‐Cl₂bpy ligands. While compounds 1 , 2 , 3 , 4 are all active and highly selective catalysts for the hydrogenation of FFR to FFA under modest reaction conditions, 3 and 4 showed decreased activity. This is best explained in terms of reduced Lewis acidity of the Ru²⁺ centers and reduced steric hindrance about the metal centers of catalysts 3 and 4 . cis‐[Ru(6,6′‐Cl₂bpy)₂(OH₂)₂](BArF)₂ ( 2 ) also displayed high catalytic efficiency for the hydrogenation of FFA to tetrahydrofurfuryl alcohol. Presumably, this is because coordination of C═C bonds of FFA to the ruthenium center is poorly inhibited by non‐coordinating BArF counterions. Interestingly, cis‐[Ru(6,6′‐Cl₂bpy)₂(OH₂)₂](CF₃SO₃)₂ ( 1 ) showed some catalytic activity in ethanol for the hydrogenolysis of FFA to 2‐methylfuran, albeit with fairly modest selectivity. Nonetheless, these results indicate that ruthenium(II) bis(diimine) complexes need to be further explored as catalysts for the hydrogenolysis of C―O bonds of FFR, FFA, and related compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Ionic aggregation in random copolymers containing phosphonium ionic liquid monomers

Copolymers of n‐butyl acrylate and phosphonium ionic liquid monomers possessing various alkyl substituents and counterions were synthesized through a combination of conventional free radical copolymerization and anion exchange. Differential scanning calorimetry and dynamic mechanical analysis provided the thermal and mechanical properties of these phosphonium cation‐containing random copolymers. Factors including alkyl chain length of phosphonium substituents, counterion type, as well as ionic concentration significantly influenced the association of phosphonium cations. Phosphonium ionomers with trialkyl substituents on phosphonium cations did not display the characteristic small‐angle X‐ray scattering peak, suggesting the absence of ionic clusters. However, low q peaks in wide‐angle X‐ray diffraction was indicative of significant concentration fluctuations wherein the ionic monomeric units associated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fatty amides synthesized from vegetable oil as extractant of molybdenum(VI)

In this study, fatty amides (FAs) synthesized from palm olein were used to extract and separate Mo(VI) from acidic media. Effects of various parameters upon the separation of Mo(VI) from Co(II), Ni(II), Al(III) and Mn(II), including extractant concentration, metal ion concentration, contact time, diluent, and acidity, were investigated. It was found that Mo(VI) was successfully separated from the above commonly associated metal ions by stripping from the loaded organic phase. Different acidic and alkaline solutions were used. Ammonium hydroxide solution was an optimal. Extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. This work presents the development of a low-cost and environmentally friendly extractant to recycle and recover molybdenum.     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

Bigger data,collaborative tools and the future of predictive drug discovery

Over the past decade we have seen a growth in the provision of chemistry data and cheminformatics tools as either free websites or software as a service commercial offerings. These have transformed how we find molecule-related data and use such tools in our research. There have also been efforts to improve collaboration between researchers either openly or through secure transactions using commercial tools. A major challenge in the future will be how such databases and software approaches handle larger amounts of data as it accumulates from high throughput screening and enables the user to draw insights, enable predictions and move projects forward. We now discuss how information from some drug discovery datasets can be made more accessible and how privacy of data should not overwhelm the desire to share it at an appropriate time with collaborators. We also discuss additional software tools that could be made available and provide our thoughts on the future of predictive drug discovery in this age of big data. We use some examples from our own research on neglected diseases, collaborations, mobile apps and algorithm development to illustrate these ideas.